American Dynamics RAS916LS Security Camera User Manual


 
Enabling or Disabling Password Protection
Password protection must be enabled before passwords can be used. To enable or disable the dome
password:
1. Select Language/Password from the Dome Configuration Menu.
2. Move the highlight bar to Password Protection.
3. Change the setting.
Select On to enable password protection.
Select Off to disable password protection.
The default setting is Off.
4. Select Exit. The Dome Configuration Menu appears. Continue with What To Do Next on page
6–4.
Tip: Instructions for entering the dome password are found in Chapter 1.
What To Do Next
When you select Exit from the Language / Password screen, the Dome Configuration Menu
appears.
DOME CONFIGURATION MENU
PAN/TILT/ZOOM/SYNC OPTS
CAMERA FUNCTIONS
ALARMS/AREAS/PRESETS/PZ
ON-SCREEN TEXT DISPLAY
LANGUAGE / PASSWORD
DOME INFORMATION
RESET TO FACTORY SETTINGS
QUIT WITHOUT SAVING
EXIT AND SAVE CHANGES
From this screen you can:
Chapter 2
Cha
p
ter 3
Chapter 4
Cha
p
ter 5
Cha
p
ter 6
Cha
p
ter 7
Cha
p
ter 1
Select an option to make additional changes.
Restore all settings to the factory defaults.
Exit the utility without saving changes.
Save the changes and exit the utility.
Move the highlight bar to an item and select it. Refer to the related chapter for additional information.
SpeedDome Ultra VII Operator's Manual 6
4