Filter
Top Products
AXIS 211M - System Options
31
QoS DSCP Settings
For each type of network traffic supported by your Axis network video product, enter a DSCP (Differentiated
Services Codepoint) value. This value is used to mark the traffic’s IP header. When the marked traffic reaches a
network router or switch, the DSCP value in the IP header tells the router or switch which type of treatment to
apply to this type of traffic, for example, how much bandwidth to reserve for it.
Note that DSCP values can be entered in decimal or hexadecimal format, but saved values are always shown in
decimal. For more information on Quality of Service, please see the Axis support web at www.axis.com/techsup
SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the fields provided, to enable
the sending of notifications and image/video email messages from the camera to predefined addresses via SMTP.
If your mail server requires authentication, check the box for Use authentication to log in to this server and
enter the necessary information.
SNMP
The Simple Network Management Protocol (SNMP) allows remote management of network devices. Depending
on the level of security required, select the version of SNMP to use. The three levels of security are:
• SNMP V1 - includes no security.
• SNMP V2c - uses very simple security. The community name can be specified as a password for read or
read/write access to all supported SNMP objects. The community is the group of network devices using
SNMP.
• SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled.
UPnP™
The camera includes support for UPnP™, which is enabled by default. If also enabled on your computer, the
camera will automatically be detected and a new icon will be added to “My Network Places.”
Note: UPnP™must also be enabled on your operating system. Refer to your operating systems help or user manual for more information.
RTP / MPEG-4
These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for
the video stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should be used for
multicast streams. For more information, please see the online help.
Bonjour
The AXIS 211M includes support for Bonjour. When enabled, the camera is automatically detected by operating
systems and clients that support this.
Ports & Devices
I/O Ports - the pinout, interface support and the control and monitoring functions provided by this connector
are described in
I/O Terminal Connector, on page 34.
LED Settings
The Network Indicator LED can be enabled or disabled, according to requirements and the Status indicator LED
can be set to flash at a configurable interval (or to not light up at all) whenever the unit is accessed. For a listing
of all LED behavior, see
page 7, or the online help.
Note that the Status LED does not flash when the stream is retrieved using MPEG-4 multicast.