Filter
Top Products
AXIS 211M - System Options
33
Advanced
Scripting is an advanced function that provides the means for customizing and using scripts.
Caution!
The scripting function is a very powerful tool. Improper use may cause unexpected behavior or even loss of
contact with the unit. If a script does cause problems, reset the unit to its factory default settings (in which case,
a previously saved backup file will be useful for returning the unit to its latest configuration). Axis strongly
recommends that you do not use this function unless you fully understand the consequences. Axis support
provides no assistance for customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config - this function is for the advanced user with previous experience of configuring Axis cameras. All
parameters can be set and modified from this page. Help is available via the links on the standard setup pages.
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page
(as described in
Maintenance, on page 31) or use the Reset button on the rear of the camera (see the illustration
on page 6) as described below:
Using the Reset Button
To reset the camera to the factory default settings using the Reset Button:
1. Disconnect the power adapter, or the network cable if using PoE.
2. Press and hold the Reset button while reconnecting power.
3. Keep the Reset button pressed until the Status Indicator color changes to amber (which may take up to
15 seconds).
4. Release the Reset button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete
and the camera has been reset. The unit will now have the default IP address 192.168.0.90