Filter
Top Products
AXIS 211M - Product Features
7
External microphone/line in - One 3.5mm input for a mono microphone, or for line in mono signal (only the
left channel is used from a stereo signal).
Audio output/line out - Audio output (line level) can be connected to a public address (PA) system or an active
speaker with a built-in amplifier. A stereo connector must be used for the audio out.
Power Connector - For connection of the PS-K power adapter (included).
I/O Terminal Connector - The I/O terminal connector provides the physical interface to one transistor output,
one digital input and an auxiliary connection point for DC power. For more information, see
I/O Terminal
Connector, on page 34.
Network connector - The AXIS 211M connects to the network via a standard network cable, and automatically
detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to
power the AXIS 211M via Power over Ethernet (PoE).
Serial Number - This number is used during installation.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service as described in the
AXIS 211M Installation Guide or to restore the factory default settings, as described
on page 33.
LED Indicators - After completion of the startup and self test routines, the multi-colored Network, Status, and
Power LED indicators flash as follows:
Network Green Steady for connection to 100 Mbit/s network. Flashes for network activity.
Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.
Unlit No connection
Note: The Network LED can be configured to be unlit during normal operation. See the online help files for more informa-
tion. Go to Setup > System Options > LED settings.
Status Green Shows steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed.
See the online help files for more information. Go to Setup > System Options > LED settings
Amber Steady during startup, reset to factory default or when restoring settings.
Red Slow flash for failed upgrade.
Power Green Normal operation.
Amber Flashes green/amber during firmware upgrade.
LED Color Description