Cannon 300II Photo Scanner User Manual


 
31
ABOUT THE SOFTWARE
About the Reader-Printer mode
When the scanner is set to the Reader-Printer mode, all the set-
tings and operation of the scanner must be performed through the
operation panel on the main body. For how to operate the scan-
ner, see “SETTING THE SCANNER” (P.34).
The Reader-Printer mode is a mode in which the scan-
ner can perform the same functions as an ananlog
Reader-Printer does. In the Reader-Printer mode, im-
ages scanned by the scanner can be directly printed
out through a printer that is designated by the
CapturePerfect. (Note, however, that the scanned im-
ages will not be saved.)
Starting up Reader-Printer mode
The ReaderPrinter Emulation mode is started up from the
CapturePerfect 1.0 menu.
Setting the Reader-Printer mode
1. Select “Reader-Printer Mode Settings” in the “File” menu and
display the “Reader-Printer Mode Settings” dialog.
For the Reader-Printer Mode Settings, refer to the
CapturePerfect Help.
2. Click “OK” when settings are completed.
Starting up the Reader-Printer mode
1. Select “Reader-Printer Mode” in the “File” menu to start up the
Reader-Printer mode.
When the Reader-Printer mode once starts up, the
CapturePerfect main screen is going to reside in the
task tray as the icon.
The number appearing on the icon indicates the
SCSI ID that the scanner is connected to.
All settings and operation of the scanner can mostly
be performed through the operation panel on the
main body.
MS 300_english.p65 07.5.14, 10:1431