Filter
Top Products
124
J Protecting Images
Images can also be protected individually when the [3 Protect images]
menu is set to [Select images]. Press <0> to protect or unprotect the
image.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the protection.
If you erase all the images (p.128), only the protected images will remain.
This is convenient when you want to erase unnecessary images all at once.
K Sound Recording
You can add a sound clip to an image. The sound clip will be saved as a
sound file (WAV format) having the same file number as the image. The
sound can be played back with the provided software.
1
Playback the image to which you
want to add the sound clip.
2
Record the sound.
While the image is displayed, press
the <H> button for about 2 sec.
When [Sound recording] appears,
keep pressing the button and speak
into the built-in microphone. The
maximum recording time for a sound
clip is 30 sec.
To end the sound clip, let go of the
button.
X The sound will be recorded, and the
< > icon will appear on the screen.
Microphone
The camera cannot playback the sound clip.
Sound recording is not possible with a protected image.
To record a sound clip longer than 30 sec., repeat step 2.
You can also record sound once, right after image capture during the
image review by following step 2.
COPY