Filter
Top Products
187
Camera Settings & Battery Information
You can check the battery’s condition on a menu screen.
Select [Battery info.].
Under the [6] tab, select [Battery
info.], then press <0>.
3 Battery Info.
Designation of the battery being used
or household power source.
Remaining battery level displayed by
the battery check display (p.29) in 1%
increments.
Shots taken with the current battery.
The number is reset when the battery
is recharged.
Battery’s performance level is
displayed in one of three levels. (p.27)
(Green): Battery performance
is fine.
(Green): Battery performance
is slightly degraded.
(Red):
Purchasing a new
battery is recommended.
If “Calibration is recommended when charging battery next time” is
displayed at the bottom of the LCD monitor, see page 28.
If for some reason, communication with the battery is not successful, the
battery check display will show <c> on the top LCD panel and the
viewfinder. When you check the battery info, [Cannot communicate
with battery] will be displayed. However, shooting will still be possible.
If you use any battery other than Battery Pack LP-E4, the camera might
not attain its full performance. It may also cause camera malfunction.
Using Battery Pack LP-E4 is recommended.
COPY