Filter
Top Products
177
3 Custom Function Settings
C.Fn IV -12 Timer length for timer
You can change how long the function settings remain in effect after you let
go of the respective button.
Disable: The timer length is set to the default.
Enable: The timer length is set to the time set with [Register].
Register:You can set the 6-sec. and 16-sec. timer length and the timer
length for after the shutter release. The timer length can be set to
0 sec. to 59 sec. or 1 min. to 60 min. After entering the settings,
select [Apply].
• 6-sec. timer: Works with the metering while you shoot through
the viewfinder. Also works when you press the
<A> button for AE lock.
• 16-sec. timer: Works when you press the <I> button for
multi-spot metering and FE lock. Also works
during Live View shooting for metering and
pressing the <A> button for AE lock.
• Timer after release: Normally, the timer is 2 sec. after the
picture is taken. A longer timer length will
make it easier to use AE lock at the same
exposure.
C.Fn IV -13 Shortened release time lag
Normally, stabilization control is executed for the shutter-release time lag.
This stabilization control can be omitted to make the shutter-release time
lag shorter.
0: Disable
1: Enable
When the aperture is stopped down to no more than 3 stops from the
maximum aperture, the shutter-release time lag will be as much as
about 20% shorter than normal.
COPY