Canon 2011B002 Digital Camera User Manual


 
157
3 Setting Custom Functions
Custom Functions
C.Fn I: Exposure C.Fn III: Auto focus/Drive
1 Exposure level increments 1 USM lens electronic MF
2 ISO speed setting increments 2 AI Servo tracking sensitivity
3 Set ISO speed range
3 AI Servo 1st/2nd image priority
4 Bracketing auto cancel 4 AI Servo AF tracking method
5 Bracketing sequence 5 Lens drive when AF impossible
6 Number of bracketed shots
6 Lens AF stop button function
7 Spot metering link to AF point 7 AF Microadjustment
8 Safety shift 8 AF expansion with selected point
9 Select usable shooting modes
9 Selectable AF point
10 Select usable metering modes 10 Switch to registered AF point
11 Exposure mode in manual exposure 11 AF point auto selection
12 Set shutter speed range
12 AF point display during focus
13 Set aperture value range 13 AF point brightness
14 Apply shooting/metering mode 14 AF-assist beam firing
15 Flash sync. speed in Av mode
15 Mirror lockup
16 Continuous shooting speed
17 Limit continuous shot count
C.Fn II: Image/Flash exposure/Display
C.Fn IV: Operation/Others
1 Long exposure noise reduction 1 Shutter button/AF-ON button
2 High ISO speed noise reduction 2 AF-ON/AE lock button switch
3 Highlight tone priority 3 Quick Control Dial in metering
4 E-TTL II flash metering 4 SET button when shooting
5 Shutter curtain sync. 5 Tv/Av setting for Manual exposure
6 Flash firing 6 Dial direction during Tv/Av
7 Viewfinder info. during exposure 7 Av setting without lens
8 LCD panel illumination during Bulb 8 WB + media/image size setting
9 INFO button when shooting 9 H button function
10 Button function when 5 <OFF>
11 Focusing Screen
12 Timer length for timer
13 Shortened release time lag
14 Add aspect ratio information
15 Add original decision data
16 Live View exposure simulation
The Custom Functions whose
numbers are shaded do not
function during Live View
shooting. (Settings are disabled.)
COPY