Filter
Top Products
190
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
To prevent mishaps, the battery charger cannot recharge any battery
other than Battery Pack LP-E4.
The battery is not properly installed in the camera. (p.29)
Make sure the memory card slot cover is closed. (p.32)
If the top LCD panel does not display the camera settings, recharge
the battery. (p.26)
The images are still being recorded to the memory card. After all the
images are recorded to the memory card, the access lamp turns off
and the camera turns off automatically.
Use a fully-charged battery. (p.26)
The battery performance might have degraded. See the [6 Battery
info.] menu to check the battery’s performance level (p.187). If the
battery performance is poor, replace the battery with a new one.
Auto power off is in effect. If you do not want auto power off to take
effect, set the [5 Auto power off] menu to [Off].
Troubleshooting Guide
Power
The battery cannot be recharged with the battery charger provided.
The camera does not operate even when the power switch is
set to <1>.
The access lamp remains on even when the power switch is
set to <2>.
The battery becomes exhausted quickly.
The camera turns off by itself.
COPY