Filter
Top Products
30
Installing and Removing the Battery
Battery Life
The figures above are based on a fully-charged LP-E4, no Live View shooting,
and CIPA (Camera & Imaging Products Association) testing standards.
1
Flip out the battery release
handle and turn it as shown by
the arrow.
2
Pull out the battery.
To prevent shorting, be sure to attach
the protective cover (p.22) to the
battery.
When not using the camera, attach
the battery compartment cap.
Temperature At 23°C / 73°F At 0°C / 32°F
Possible Shots Approx. 1800 Approx. 1400
Removing the Battery
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
Pressing the shutter button halfway for long periods or operating only the
autofocus can also reduce the number of possible shots.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
For battery life when Live View shooting is used, see page 114.
If the battery’s rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
Rubber lining
COPY