Filter
Top Products
90
1
Press the <Q> button. (9)
2
Select the metering mode.
While looking at the top LCD panel,
turn the <6> dial.
q: Evaluative metering
w: Partial metering
r: Spot metering
e: Center-weighted average
metering
q Evaluative metering
This is the camera’s standard metering mode
suited for most subjects even under backlit
conditions. After detecting the subject’s position
in the viewfinder, the brightness, background,
front and back lighting conditions, and other
complex lighting elements, the camera sets the
proper exposure for the main subject.
w Partial metering
Effective when the background is much brighter
than the subject due to backlighting, etc. The
metering is weighted at the center covering about
8.5% of the viewfinder area.
r Spot metering
This is for metering a specific part of the
subject or scene. The metering is
weighted at the center covering about
2.4% of the viewfinder area.
q Metering Modes
When C.Fn I -7 [Spot meter. link to AF point] is set to [1:Enable (use
active AF point)], spot metering can be linked to the 19 (or 9 outer or inner
points) AF points. (p.160)
COPY