Filter
Top Products
132
Whenever you set the power switch to <
1/J
> or <
2
>, the Self Cleaning
Sensor Unit operates (approx. 3.5 sec.) to automatically shake off any dust on
the front of the sensor. Normally, you need not be aware of this operation.
However, you can execute the sensor cleaning at anytime as well as disable it.
1
Select [Sensor cleaning].
Under the [7] tab, select [Sensor
cleaning], then press <0>.
2
Select [Clean nowf].
Turn the <5> dial to select [Clean
nowf], then press <0>.
3
Select [OK].
Turn the <5> dial to select [OK],
then press <0>.
X During the sensor cleaning, the
<
f> icon will be displayed on the
LCD monitor. When the cleaning
ends, the screen will return to step 2.
In step 2, select [Auto cleaningf] and set it to [Disable].
X Whenever you set the power switch to <1/J> or <2>, the
sensor cleaning will not be executed.
3 Automatic Sensor Cleaning
Cleaning the Sensor Now
Disabling Automatic Sensor Cleaning
The user-executed cleaning takes about 4 sec. to complete. During the
sensor cleaning, the shutter will make 3 shutter-release sounds. The
camera is not taking pictures.
For best results, do the sensor cleaning while the camera bottom is
placed on a table or other surface at a perpendicular angle.
Even if you repeat the sensor cleaning multiple times, the result will not
improve that much. Right after the sensor cleaning is finished, the
[Cleaning nowf] option will remain disabled temporarily.
COPY