Filter
Top Products
Playback
Basic Functions
E
29
POINTS TO CHECK
Stop the playback before using this
function.
Press .
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few seconds
of the recording and stops the tape.
• To cancel the search press
again.
NOTES
End search cannot be used once you remove
the cassette.
If there are blank sections between
recordings, or sections recorded in different
standards (HDV/DV) on the same tape, the end
search may not work correctly.
Locating Scenes by Recording Date
You can locate the change of the date/
time zone with the date search function.
Press or on the wireless
controller.
• Press more than once to search for
further date changes (up to 10 times).
• To cancel the search press .
NOTES
Recordings shorter than 1 minute per date/
time zone cannot be located with this function.
Date search may not function if the date, time
or data code are not correctly displayed.
If there are sections recorded in different
standards (HDV/DV) on the same tape, the date
search may not work correctly.
Viewing Still Images
1 Holding the lock button pressed
down, set the POWER switch to
PLAY.
2 Move the / switch to
(memory card).
3 Press or to move between the
images.
I
MAGE
J
UMP
You can jump ahead to a specific image
without having to browse all images one
by one.
Press / and hold it pressed down.
Release the button when the image
number gets to the image you want to
display.
END SEARCH
END SEARCH
STOP
( 10)
+
-
+
-