Filter
Top Products
Trouble?
75
Additional Information
E
Memory Card Operation
No sound from the built-in
speaker.
Open the LCD panel. –
Speaker volume is turned off. Adjust the volume with the
dial.
27
When playing back a tape
recorded in HDV standard the
playback is jerky or the sound
stutters on and off.
Video heads are dirty. Clean the video heads. 82
Image will not appear on the
TV screen.
Set [AV DV] to [OFF]. 33
Check again that the camcorder is properly connected to the TV. 57
When connecting the camcorder to an HDTV using the CTC-100
Component Cable, make sure to select the correct specification
for the [COMP.OUT] setting.
57
There is no sound from the TV. When connecting the camcorder to an HDTV using the CTC-100
Component Cable, make sure to connect also the audio
connections using the white and red plugs of the STV-250N
Stereo Video Cable.
57
Text displays do not appear on
the TV.
If you connected the camcorder to the TV using the video
component connection, set [DV OUTPUT] to [HDV/DV].
35
Tape is running, but image will
not appear on the TV screen.
TV/VIDEO selector on the TV is not set to VIDEO. Set the
selector to VIDEO.
59
Video heads are dirty. Clean the video heads. 82
You attempted to play back or dub copyright a protected tape.
Stop playback/dubbing.
62
Problem Solution
Memory card cannot be
inserted.
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
20
Cannot record on the memory
card.
Memory card is full. Erase still images to free some space or
replace the memory card.
55
Memory card was not initialized. Initialize the memory card. 56
The folder and file numbers have reached their maximum value.
Set [FILE NOS.] to [RESET] and insert a new memory card.
33
Memory card cannot be played
back.
Set the camcorder to . 29
Image cannot be erased. Image is protected. Cancel the protection. 55
“ ” flashes in red. Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
persists.
56
Problem Solution
SET