Filter
Top Products
Playback
30
IMPORTANT
Avoid the following actions while the card
access display appears on screen, and
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
/
switch or the operating mode.
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
1 Press .
2 Select ( ) [ SLIDESHOW] and
press .
3 Select ( ) [START] and press
.
Press to stop the slideshow.
Index Screen
1 Move the zoom lever toward
W
.
The index screen appears.
2 Select ( ) an image.
• Move the cursor to the image
you want to view.
• Press or to move to the next/
previous index page.
3 Move the zoom lever toward
T
.
The index screen closes and the
selected image is displayed.
Magnifying the Playback Image
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
1 Move the zoom lever toward
T
.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward
T
. To reduce the
magnification, move the zoom lever
toward
W
.
• will appear for images that cannot
be enlarged.
2 Select the enlarged area of the
picture with the dial.
• Move ( ) the frame right/left or up/
down. Press to change between
the directions.
• To cancel the magnification, move
the zoom lever toward W until the
frame disappears.
SLIDESHOW
FUNC.
( 23)
FUNC.
SET
SET
FUNC.
+
-
( 10)
SET
SET