Filter
Top Products
Trouble?
77
Additional Information
E
INCORRECT TAPE
SPECIFICATION
You attempted to play back a tape recorded in a different television
system (PAL or SECAM) or in a recording standard not supported
by this camcorder.
–
INPUT SIGNAL NOT
SUPPORTED
The digital device connected with the DV cable is incompatible with
the camcorder.
–
PLAYBACK STD LOCKED
INCOMPATIBLE VIDEO
INPUT
Current camcorder settings do not match the HDV/DV standard of
the video input signal. Change the [PLAYBACK STD] setting to
match the video input signal.
34
PLAYBACK STD LOCKED
PLAYBACK IS
RESTRICTED
Current camcorder settings do not match the HDV/DV standard of
the recording you tried to play back. Change the [PLAYBACK STD]
to match the recording standard of the tape.
34
HEADS DIRTY, USE
CLEANING CASSETTE
Video heads are dirty. Clean the video heads. 82
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
You attempted to play back a copyright protected tape. 62
COPYRIGHT PROTECTED
DUBBING RESTRICTED
You attempted to dub a copyright protected tape. May also appear
when an anomalous signal is received during analog line-in
recording.
62
NO CARD Memory card not is inserted into the camcorder. 20
NO IMAGES No images are recorded on the memory card. –
CARD ERROR A memory card error occurred. The camcorder cannot record or
display the image.
The error may be temporary. If the message disappears after 4
seconds and “ ” flashes red, turn the camcorder off, remove the
card and reinsert the card. If “ ” changes to green, you can
continue recording/playback.
–
CARD FULL Memory card is full. Erase some images to free some space or
replace the memory card.
55
IN CARD POSITION You pressed while recording still images (
mode).
–
NAMING ERROR The folder and file numbers have reached their maximum value.
Set the [FILE NOS.] option to [RESET] and erase all the images on
the memory card or initialize it.
55
56
UNIDENTIFIABLE IMAGE The image file is corrupted or it was saved using a compression
method other than that compatible with this camcorder (JPEG).
–
TRANSFER ORDER
ERROR
You attempted to set more than 998 transfer orders. 67
PRINT ORDER ERROR You attempted to set more than 998 still images in the print order. 71
CANNOT TRANSFER! You attempted to transfer a still image that cannot be displayed with
this camcorder.
–
TOO MANY STILL IMAGES
DISCONNECT USB CABLE
Disconnect the USB cable and decrease the number of still images
on the memory card to less than 1800. If a dialog appeared on the
computer screen, close it and then restore the connection.
–
Message Explanation/Solution
Start/Stop