Filter
Top Products
Other Functions
Advanced Functions
E
51
Selecting the Data Code
You can select the data code to be
displayed when playing back movies.
Options
Default value
Reading the Histogram Display
When viewing still images you can
display the histogram display and the
icons of all the functions used at the time
of recording. Use the histogram as a
reference to verify the correct exposure of
the still image.
The area to the right of the histogram
represents highlights and the left side
represents shadows. A still image whose
histogram skews to the right is relatively
bright; while one whose histogram peaks
to the left, is relatively dark.
NOTES
If you turn all displays on with , the
histogram display will appear also after
recording a still image while reviewing it within
the time set for the [REVIEW] option (or
immediately after recording it, if [REVIEW] is set
to [ OFF]).
Flash
You can use the built-in flash for
recording still images in dark places. The
flash is equipped with the red-eye
reduction function.
POINTS TO CHECK
Select a recording program other than
[ FIREWORKS] ( ).
Options
Default value
[ DATE], [ TIME]
Displays the date or time when the scene
or still image was recorded.
[ DATE & TIME]
Displays both the date and time of the
recording.
[ CAMERA DATA]
Displays the exposure (f-stop) and shutter
speed used when recording the image.
[ CAM.& D/T]
Displays the exposure, shutter speed, date
and time of the recording.
MENU
( 22)
DISPLAY SETUP/
DATA CODE
Desired option
MENU
MENU
( 10)
(auto)
The flash fires automatically according to
the brightness of the subject.
(red-eye reduction, auto)
The assist lamp lights up to reduce the
red-eye effect. The flash fires automatically
according to the brightness of the subject.
(flash on)
The flash always fires.
(flash off)
The flash does not fire.
Shadows
Pixel Count
Highlights
DISP.