Filter
Top Products
17Before Printing
Loading Envelopes
Use either European DL or US Comm. Env. #10-sized envelope.
z Loading Envelopes in the Auto Sheet Feeder
1 Load the envelope against the Cover Guide
(the right side of the Paper Support).
Load with the front face UP and the rear flaps
DOWN on the left.
A maximum of 10 envelopes can be loaded at
once.
2 Pinch the Paper Guide and slide it against the
left side of the envelope.
3 Press the Paper Feed Switch so that the
Auto Sheet Feeder lamp lights up.
4 In the printer driver, select Envelope in
Media Type, and then select DL Env. or
Comm. Env. #10 in Page Size.
For details on printer driver settings, see “Printing with Windows” on page 19 or “Printing with
Macintosh” on page 20.
Important
z Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals, or
sticker flaps.
z Select either DL Env. or Comm. Env. #10 in the printer driver according to the envelope size
you are using. If you do not, the address will be printed in the wrong direction.
Important
Make sure that the Cover Guide is set upright when
you load paper in the Auto Sheet Feeder.
*1
*2
3
1
2
*1 Printing orientation
*2 Make sure the flaps are folded.