Filter
Top Products
33Routine Maintenance
5 Install the ink tank.
(1) Insert the front end of the ink tank into the Print
Head.
(2) Press on the mark on the ink tank until
the ink tank snaps firmly into place.
(3) Make sure that the ink lamp lights up red.
6 Close the Inner Cover.
7 Close the Top Cover.
Important
The printer cannot be used unless all the ink tanks are
installed.
Note
Make sure that the Inner Cover is closed. Printing will
not start with the Inner Cover open since paper can not
be fed properly.
Note
z If the ALARM lamp still flashes orange after the Top Cover is closed, see “ALARM Lamp
Flashes Orange” on page 76.
z When you start printing after replacing the ink tank, Print Head Cleaning is performed
automatically. Do not perform any other operations until Print Head Cleaning finishes. The
POWER lamp flashes green during cleaning.
(1)
(2)
(3)
*1
*1Make sure the position of the
tank matches the label.