Filter
Top Products
22 Printing Photographs Directly from a Compliant Device
3 Connect the PictBridge compliant device to the printer.
(1) Make sure that the PictBridge compliant device
is turned off.
(2) Connect the PictBridge compliant device to the
printer using a USB cable recommended by
the manufacturer of the device.
The device turns on automatically.
If your device does not turn on automatically,
turn it on manually.
(3) Set up the PictBridge compliant device for
direct printing.
will appear on the LCD of the device when
the printer is correctly connected.
Note
Depending on the model or brand of your device, you may have to select a print mode compliant
with PictBridge before connecting the device. You may also have to turn on the device or select
Play mode manually after connecting the device to the printer.
Perform necessary operations on the PictBridge compliant device before connecting it to this
printer according to instructions given in the device’s instruction manual.
Note
If does not appear, see “Cannot Print Properly
from a Digital Camera” on page 82.
(2)