Filter
Top Products
163
Appendix
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Change the flash mode setting to
<
(Flash On) for daylight synchro flash (page 35), or adjust EV
shift to the + side (page 40).
Digital zoom
(including HD
zoom) does not
work. The zoom
bar indicates zoom
only up to a zoom
factor of 20.
The digital zoom setting may be turned off. Turn on digital zoom
(page 82).
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 144).
3)Continuous Auto Focus is not performed during movie
recording when optical zoom is turned on while “HD/STD” is
selected as the movie mode, regardless of the current
Continuous AF setting. You can readjust focus while movie
recording is in progress by half pressing the shutter button,
but doing so will cause noise produced by the lens operation
to be picked up in the audio recording.
4)Focus is fixed during movie recording when “HS” is selected
as the movie mode.
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
edited (with
resizing, trimming,
rotation).
Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
• CS group snapshots
•Movies
• Snapshots recorded with another camera
Problem Possible Cause and Recommended Action