63
Recording Movies
You can use the following procedure to turn optical zoom (page 44) on or off while
“HD/STD” is selected as the movie mode.
1. Set the mode dial to
³
(HD/STD).
2. Press [8].
3. Use [8] and [2] to select the fourth control panel option from the
bottom (Optical Zoom).
4. Use [4] and [6] to select the setting you want and then press [SET].
NOTE
• Optical zoom operation while recording is disabled when “HS” is selected as the
movie mode.
• Regardless of the above setting, optical zoom operation prior to recording is
supported when either “HS” or “HD/STD” is selected as the movie mode.
• Optical zoom is disabled when “Á Super Macro” is selected as the focus mode.
Turning Optical Zoom On or Off (Optical Zoom)
Optical Zoom:
On/Record: Off
Enables optical zoom and disables audio recording.
Continuous AF is always performed during recording.
Optical Zoom:
Off/Record: On
Disables optical zoom and enables audio recording.
Continuous AF is never performed during recording. You
can readjust focus while recording is in progress by half
pressing the shutter button, but doing so will cause noise
produced by the lens operation to be picked up in the audio.