Filter
Top Products
93
Viewing Snapshots and Movies
1. Use the AV cable that comes with the camera to connect it to the TV.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• Before connecting to a TV to display images, be sure to
configure the camera’s [r] (REC) and [p] (PLAY) buttons
for “Power On” or “Power On/Off” (page 132).
• Make sure that the camera is turned off before plugging in or unplugging the
cable. Check the user documentation that comes with the TV for information
about requirements before plugging into or unplugging from the TV.
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
Viewing Snapshots and Movies on a TV Screen
TV
Yellow
AV cable (bundled)
USB/AV port
White
Making sure that the 6 mark on the
camera is aligned with the 4 mark of
the AV cable connector, connect the
cable to the camera.
AudioVideo
VIDEO IN jack (yellow)
AUDIO IN jack (white)