Filter
Top Products
18
Quick Start Basics
2. Load a memory card.
Positioning the memory card so
its back is facing in the same
direction as the monitor screen
side of the camera, slide it into
the card slot as far as it will go,
until you hear it click securely
into place.
3. Close the memory card slot cover.
Pressing the memory card slot cover against the camera,
slide it closed.
• For information about how to replace the memory card,
see page 151.
IMPORTANT!
• Never insert anything besides a supported memory card (page 17) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the batteries, and contact your retailer or nearest CASIO
authorized service center.
You need to format a new memory card before using it for the first time.
1. Turn on the camera and press [MENU].
2. On the “Set Up” tab, select “Format” and then press [6].
3. Use [8] and [2] to select “Format” and then press [SET].
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD or SDHC memory card, formatting on a computer can
result in non-conformity with the SD format, causing problems with compatibility,
operation, etc.
To format (initialize) a new memory card
Front Back
1
2
B