Filter
Top Products
52
Snapshot Tutorial
1. Set the mode dial to
×
(High-speed CS).
2. Use [8] and [2] to select the second control panel option from the
bottom (High-speed CS fps).
3. Use [4] and [6] to select the continuous
shutter (CS) speed you want and then press
[SET].
4. Use [8] and [2] to select the bottom control
panel option (Prerecord (Still image) Time).
5. Use [4] and [6] to specify how many of the 40 images and for how
long images should be pre-recorded in the buffer.
• Prerecord (Still image) shooting is not performed when the number of buffer
images and the recording time are both zero.
6. Press [SET].
• The approximate
number of recordable
CS images will appear
on the monitor screen.
7. Half-press the shutter button.
This will cause the camera to start pre-recording images.
• The camera will not emit a shutter sound when you half-press the shutter
button while Prerecord (Still image) is selected.
CS speed
Number of pre-record images and pre-record time
Number of remaining images and remaining recording
time after the shutter button full-press
Shutter button full-press
Remaining snapshot memory capacity
Number of recordable CS images (If you are
not performing Prerecord CS, the allowable
continuous shutter time also is displayed.)
B