Filter
Top Products
20
Quick Start Basics
1. Remove the lens cap and then press [r] (REC) to turn on the camera.
2. Set the mode dial to t (Single Shot).
3. Press [8] .
4. Use [8] and [2] to select the top option in the
control panel (Exposure mode).
5. Use [4] and [6] to select t (Auto) and then
press [SET].
• You can use either monitor screen or viewfinder to
compose the image. Each press of the
[EVF/LCD] button cycles through the available
monitor screen and viewfinder on/off settings (page
136). If the image in the viewfinder appears blurry,
use the diopter dial to adjust it.
To shoot a snapshot
[r] (REC)
Shutter button
Monitor screen
Viewfinder
Mode dial
[SET]
Diopter dial
[EVF/LCD]
[8] [2] [4] [6]
Snapshot mode icon