Filter
Top Products
68
Using BEST SHOT
When you press the shutter button while High Speed Anti Shake is enabled, the
camera records multiple images and automatically combines them in a way that
produces a final image with minimal blur. You can shoot with this feature to minimize
the effects of camera movement when shooting with optical anti shake does not
produce the desired results.
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “High Speed Anti Shake”.
4. When you are ready to shoot, press the shutter button.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• High Speed Anti Shake will not operate correctly while the camera is mounted on a
tripod.
• High Speed Anti Shake may not operate properly resulting in blurred images if the
camera is moved more than the allowable range or if the subject moves during
shooting.
Shooting with High Speed Anti Shake
(High Speed Anti Shake)