Filter
Top Products
69
Using BEST SHOT
When you point the camera at a moving object and pan as you press the shutter
button, the camera will perform a continuous shutter operation, recording multiple
images. Then it will automatically correct for blurring of the subject only in the
recorded images and combine them into a single image that shows a clear subject on
a blurred background. This feature lets you shoot powerful panning images simply by
following the subject.
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “Digital Panning”.
4. When you are ready to shoot, press the shutter button.
• Lines will appear on the monitor screen, dividing it into nine areas. As you
shoot, move the camera to keep the subject within the middle area as much as
possible.
NOTE
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• Under certain lighting conditions, shooting with Digital Panning can result in
overexposure.
Multi-motion image can be used to isolate a moving subject
within a series of multiple images and place them against a
stationary background. Use a tripod or some other means
to make sure that the camera is not moving or shaking
when shooting with Multi-motion image.
1. Set the mode dial to t (Single Shot), × (High-speed CS), or ª (Flash
CS).
2. Press [BS].
3. Select “Multi-motion Image”.
4. Hold down the shutter button to record.
Shooting with Digital Panning (Digital Panning)
Isolating Moving Subjects (Multi-motion image)
Basic Multi-motion image Procedure
B