Filter
Top Products
3-28
Cisco Video Surveillance 2630 IP Dome User Guide
OL-24130-02
Chapter 3 Configuring and Managing the IP Camera
Applications Windows
If you change any options in the Mail/FTP/HTTP window, you must click Save to save the changes. To
discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the
window. You may need to scroll down to see them.
Table 3-15 describes the options in the Mail/FTP/HTTP window.
Ta ble 3-15 Mail/FTP/HTTP Window Options
Option Description
Primary SMTP Server
Primary SMTP Check this check box to enable e-mail event notification messages to be sent
to the primary Simple Mail Transport Protocol (SMTP) server.
Note For e-mail event notification to work, it must also be an enabled
action for a trigger event as described in the
“Event Window” section
on page 3-31.
SMTP Mail Server Enter the name or IP address of the primary SMTP server.
If you enter a name, you must configure the Primary DNS option as
described in the
“Basic Setup Window” section on page 3-5.
Authentication If the primary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
Account Name If the primary SMTP server requires authentication, enter the account name
for the server.
Password If the primary SMTP server requires authentication, enter the account
password for the server.
POP Server Name Enter the name of the POP3 mail server that you use to receive e-mail.
Secondary SMTP Server
Secondary SMTP Check this check box to cause e-mail messages to be sent to a secondary
(backup) SMTP server if the primary SMTP server is unavailable.
SMTP Mail Server Enter the IP address of the secondary SMTP server.
Authentication If the secondary SMTP server requires authentication to send e-mail, choose
the appropriate authentication type. The authentication type typically is the
same as that for the POP3 server that you use to receive e-mail.
Account Name If the secondary SMTP server requires authentication, enter the account
name for the server.
Password If the secondary SMTP server requires authentication, enter the account
password for the server.
POP Server Name Enter the name of the POP3 mail server that you use to receive e-mail.
E-Mail Setup
Send To Enter at least 1 e-mail address to which e-mail messages are sent when an
event occurs. The second and third addresses are optional.
Show “From” as Enter the e-mail address to be shown in the From field for e-mail messages
that are sent when an event occurs.
Subject Enter the text to be shown in the Subject field for the e-mail messages that
the IP camera sends when events occur. The subject can contain up to 48
characters, including spaces.