Filter
Top Products
3-37
Cisco Video Surveillance 2630 IP Dome User Guide
OL-24130-02
Chapter 3 Configuring and Managing the IP Camera
Status Windows
Audio/Video Window
The Audio/Video window displays information about the audio and video streams from the IP camera.
You configure audio options as described in the
“Audio Window” section on page 3-23. You configure
video options as described in the “Video Window” section on page 3-16.
To display the Audio/Video window, access the configuration windows as described in the “Accessing
the IP Camera Windows” section on page 2-16, click Status, then click Image.
To make sure that the Audio/Video window shows the most current information, click the Refresh
button.
Table 3-21 describes the options in the Audio/Video window. All options are for display only.
Ta ble 3-21 Audio/Video Window Options
Option Description
H.264 Settings 1
Status Status of the primary H.264 video stream.
Resolution Image size of the primary H.264 video stream.
Image Quality Image quality of the primary H.264 video stream.
Frame Rate Frame rate of the primary H.264 video stream.
H.264 Settings 2
Status Status of the secondary H.264 video stream.
Resolution Image size of the secondary H.264 video stream.
Image Quality Image quality of the secondary H.264 video stream.
Frame Rate Frame rate of the secondary H.264 video stream.
MPEG-4 Settings 1
Status Status of the primary MPEG-4 video stream.
Resolution Image size of the primary MPEG-4 video stream.
Image Quality Image quality of the primary MPEG-4 video stream.
Frame Rate Frame rate of the primary MPEG-4 video stream.
MPEG-4 Settings 2
Status Status of the secondary MPEG-4 video stream.
Resolution Image size of the secondary MPEG-4 video stream.
Image Quality Image quality of the secondary MPEG-4 video stream.
Frame Rate Frame rate of the secondary MPEG-4 video stream.
MJPEG Settings
Status Status of the MJPEG video stream.
Resolution Image size of the MJPEG video stream.
Image Quality Image quality of the MJPEG video stream.
Frame Rate Frame rate of the MJPEG video stream.
Audio Setting
Audio Setting Displays whether audio is enabled or disabled for the IP camera.