Filter
Top Products
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com
24
Cisco TelePresence SX20 Quick Set
ADMINISTRATOR GUIDE
Creatinganewuseraccount
1. Press Create new user.
2. Fill in the Username, Password and PIN code, and select
the user role(s) for this user account.
As a default the user have to change the password and PIN
code when signing in for the first time.
Do not fill in the Distinguished Name (DN) Subject field
unless you want to use certificate login on https.
3. Set the Status to Active to activate the user.
4. Press Save to save the changes.
Editinguserdetails
1. Select the name of an existing user to open the Editing
user window.
2. Edit the details.
3. Press Save to save the changes or Cancel to go back one
step without storing the information.
Deactivatingauseraccount
1. Select the name of an existing user to open the Editing
user window.
2. Set the Status to Inactive.
3. Press Save to save the changes.
NOTE: Always keep at least one user with ADMIN rights
Active.
Deletingauseraccount
1. Select the name of the user to open the Editing user
window.
2. Press Delete.
NOTE: Always keep at least one user with ADMIN rights
Active.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Web interface