Cisco Systems CTSSX20PHD12XK9 Security Camera User Manual


  Open as PDF
of 80
 
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com
49
Cisco TelePresence SX20 Quick Set
ADMINISTRATOR GUIDE
TheProvisioningsettings
ProvisioningConnectivity
This setting controls how the device discovers whether it should request an internal or external
configuration from the provisioning server.
Requiresuserrole: ADMIN
Valuespace: <Internal/External/Auto>
Internal: Request internal configuration.
External: Request external configuration.
Auto: Automatically discover using NAPTR queries whether internal or external configurations
should be requested. If the NAPTR responses have the "e" flag, external configurations will
be requested. Otherwise internal configurations will be requested.
Example: Provisioning Connectivity: Auto
ProvisioningMode
It is possible to configure the codec (video system) using a provisioning system / an external
manager. This allows video conferencing network administrators to manage many video systems
simultaneously.
With this setting you choose which type of provisioning system to use. Provisioning can also be
switched off. Contact your provisioning system provider/representative for more information.
Requiresuserrole: ADMIN
Valuespace: <Off/TMS/VCS/CallWay/CUCM/Auto>
Off: The video system will not be configured by a provisioning system.
TMS: The video system will be configured using TMS (Cisco TelePresence Management
System).
VCS: The video system will be configured using VCS (Cisco TelePresence Video
Communication Server).
Callway: The video system will be configured using Callway (subscription service).
CUCM: The video system will be configured using CUCM (Cisco Unified Communications
Manager).
Auto: The provisioning server will automatically be selected by the video system.
Example: Provisioning Mode: TMS
ProvisioningLoginName
This is the user name part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server. If
Provisioning Mode is Callway, enter the video number.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 80>
Format: String with a maximum of 80 characters.
Example: Provisioning LoginName: ""
ProvisioningPassword
This is the password part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server. If
Provisioning Mode is Callway, enter the activation code.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: Provisioning Password: ""
ProvisioningHttpMethod
Select the HTTP method to be used for the provisioning.
Requiresuserrole: ADMIN
Valuespace: <GET/POST>
GET: Select GET when the provisiong server supports GET.
POST: Select POST when the provisiong server supports POST.
Example: Provisioning HttpMethod: POST
ProvisioningExternalManagerAddress
Enter the IP Address or DNS name of the external manager / provisioning system.
If an External Manager Address (and Path) is configured, the system will send a message to this
address when starting up. When receiving this message the external manager / provisioning
system can return configurations/commands to the unit as a result.
When using CUCM or TMS provisioning, the DHCP server can be set up to provide the external
manager address automatically (DHCP Option 242 for TMS, and DHCP Option 150 for CUCM).
An address set in the Provisioning ExternalManager Address setting will override the address
provided by DHCP.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 64>
Format: A valid IP address format or DNS name; a compact string with a maximum of 64
characters.
Example: Provisioning ExternalManager Address: ""
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Advanced settings
 previous next