Cisco Systems CTSSX20PHD12XK9 Security Camera User Manual


  Open as PDF
of 80
 
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com
38
Cisco TelePresence SX20 Quick Set
ADMINISTRATOR GUIDE
TheH323settings
H323NATMode
The firewall traversal technology creates a secure path through the firewall barrier, and enables
proper exchange of audio/video data when connected to an external video conferencing system
(when the IP traffic goes through a NAT router). NOTE: NAT does not work in conjunction with
gatekeepers.
Requiresuserrole: ADMIN
Valuespace: <Auto/On/Off>
Auto: The system will determine if the "NAT Address" or the real IP-address should be used
within signalling. This is done to make it possible to place calls to endpoints on the LAN as
well as endpoints on the WAN.
On: The system will signal the configured "NAT Address" in place of its own IP-address
within Q.931 and H.245. The NAT Server Address will be shown in the startup-menu as: "My
IP Address: 10.0.2.1".
Off: The system will signal the real IP Address.
Example: H323 NAT Mode: Off
H323NATAddress
Enter the external/global IP-address to the router with NAT support. Packets sent to the router
will then be routed to the system.
In the router, the following ports must be routed to the system's IP-address:
* Port 1720
* Port 5555-5574
* Port 2326-2485
Requiresuserrole: ADMIN
Valuespace: <S: 0, 64>
Format: String with a maximum of 64 characters.
Example: H323 NAT Address: ""
H323Profile[1..1]AuthenticationMode
Set the authenticatin mode for the H.323 profile.
Requiresuserrole: ADMIN
Valuespace: <On/Off>
On: If the H.323 Gatekeeper Authentication Mode is set to On and a H.323 Gatekeeper
indicates that it requires authentication, the system will try to authenticate itself to the
gatekeeper. NOTE: Requires the Authentication LoginName and Authentication Password to
be defined on both the codec and the Gatekeeper.
Off: If the H.323 Gatekeeper Authentication Mode is set to Off the system will not try to
authenticate itself to a H.323 Gatekeeper, but will still try a normal registration.
Example: H323 Profile 1 Authentication Mode: Off
H323Profile[1..1]AuthenticationLoginName
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec
to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323
Gatekeeper indicates that no authentication is required, the system will still try to register. NOTE:
Requires the H.323 Gatekeeper Authentication Mode to be enabled.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: H323 Profile 1 Authentication LoginName: ""
H323Profile[1..1]AuthenticationPassword
The system sends the Authentication Login Name and the Authentication Password to a H.323
Gatekeeper for authentication. The authentication is a one way authentication from the codec
to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the H.323
Gatekeeper indicates that no authentication is required, the system will still try to register. NOTE:
Requires the H.323 Gatekeeper Authentication Mode to be enabled.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: H323 Profile 1 Authentication Password:
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Advanced settings
 previous next