Filter
Top Products
16
DCS-6620G User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
Network
Settings:
Here users can configure the Network
Settings for the camera. Enter the IP
address, Subnet mask, Default router
IP, Primary DNS, and Secondary
DNS. Automatically, the option to
reset IP address at boot is selected.
If you would like to save your IP
address settings, make sure to
uncheck this box.
Setup
On the initial Setup Screen you can configure
System and Date/Time settings for each camera.
Click Next to configure Network settings for the
camera.
System
Settings:
Enter a Camera Name and create an
Admin password for the camera.
Date/Time
Settings:
Enter the Date and Time for each
camera. These settings can also
be configured on the Tools > System
screen (page 57) when configuring
the camera via a Web browser.
Here users can configure the
Wireless Network Settings for the
camera. Enter the SSID and select
the Wireless mode, Channel, Tx
Rate, and Preamble. Check the
Data Encryption box to enable data
encryption and configure the settings.
These settings are explained and can
also be configured on the Advanced
> Network screen (page 38) when
configuring the camera via a Web
Browser.
Wireless
Network
Settings: