Filter
Top Products
30
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using and Configuring the DCS-6620G with a Router
Router Set-Up and Installation
The following steps generally apply to any router that you have on your network. The D-Link
DI-624 is used as an example to clarify the configuration process. Configure the initial settings
of the DI-624 by following the steps outlined in the DI-624 Quick Installation Guide.
Access Your Router on Your Web Browser
If you have cable or DSL service, you will most likely have a dynamically assigned WAN IP
Address. ‘Dynamic’ means that your router’s WAN IP address can change from time to time
depending on your ISP. A dynamic WAN IP Address identifies your router on the public network
and allows it to access the Internet. To find out what your router’s WAN IP Address is, go to
the Status screen on your router and locate the WAN information for your router. As shown on
the next page the WAN IP Address will be listed. This will be the address that you will need to
type in your web browser to view your camera over the Internet. Be sure to uncheck the Reset
IP address at next boot button at the top of the screen after modifying the IP address. Failure to
do so will reset the IP address when you restart your computer.
These are the port settings for your
camera. If necessary, these ports can
be changed if they are already in use
by other devices (e.g. in a multiple
camera environment).