Filter
Top Products
61
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using the DCS-6620G with an Internet Browser
Any upload action specified in the options above will use
the method chosen here. The captured snapshot named
“video.jpg” will be attached in the e-mail with subject
“Periodic snapshots.”
The captured snapshots will upload to the external FTP
server with the file name depending on the next option. It
can be used to refresh the captured image stored in the
external web server to build creative homepages.
If the suffix is added, the captured date and time can
be easily differentiated from the snapshot file name
in either sequential or event operation. For instance,
“video@20020102030405.jpg” means the JPEG image
was captured at 4 minutes and 5 seconds after 3 o’clock,
January 2nd, A.D. 2002. If the suffix is omitted, the file
named “video.jpg” on the external FTP server will be
refreshed at the specified interval.
Configuration > Tools > Applications (continued)
There are four options for two actions regarding either
trigger condition. They can have multiple selections. While
choosing the trigger output alarm, the digital output will
short both pins to connect the circuit of the attached
external device; otherwise both pins will be open. While
choosing to upload snapshots, the method can be either
e-mail or FTP. The snapshot names will be “videopre.
jpg”, videotrg.jpg”, and “videopos.jpg” respectively for the
snapshots before event, right upon event, and after event.
The date and time suffix may be added according to the
option. Confirm the external mail or FTP server settings
in network configuration.
The DCS-6620G will send snapshots at the specified
interval to the external server according to the chosen
method. Remember this operation is dependent to the
weekly schedule.
Trigger action:
Snapshot every second(s):
Send snapshots by e-mail:
Send snapshots by FTP:
FTP put snapshots with
date and time suffix:
Sequential Operation