Handling batteries
When your PhotoPC 700 batteries wear out, you can
replace them with any of the following:
Single-use AA (LR6) alkaline batteries
Single-use AA (FR6) lithium batteries
Rechargeable AA Ni-Cd batteries
Rechargeable AA Ni-MH batteries
w
Warning:
If battery acid gets into your eyes or on your skin,
immediately rinse the affected area well with water
and seek medical treatment. If the battery is
swallowed, seek medical treatment immediately.
To avoid the danger of fire or explosion, do not
mix different types of batteries.
Keep the batteries from making contact with metal
objects such as coins or keys, which could short
out the batteries’ circuits.
Do not drop, puncture, disassemble, mutilate, or
short circuit batteries. Do not put the batteries
near or into fire or water.
Do not insert batteries into wall outlets or other
power sources such as a car cigarette lighter socket.
Do not solder lead wires or terminals directly to a
battery.
To avoid fire or electric shock, do not use batteries
that are leaking or damaged in any way.
Note the following when handling batteries:
Do not use manganese batteries.
Replace all four batteries at the same time.
When the camera is not used for long periods of time,
remove the batteries and store them at a low
temperature in a dry location.
1
R
Poppy+ Rev.C
A5 size Chapter 1
5/8/98 pass 0
Getting Started
1-5
