Filter
Top Products
w
Warning:
Use only the AC adapter designed for PhotoPC 700.
Use of any other adapter could cause fire, electrical
shock, or injury. Do not use the AC power cable and
the adapter for any purpose other than powering your
PhotoPC 700. If the AC plug doesn’t fit your outlet,
have a proper outlet installed by a qualified electrician.
To avoid radiation danger, do not expose or remove the
ferrite core.
To avoid losing any images or settings, make sure the
camera is finished processing and is turned off before
you connect or disconnect the AC adapter. Then follow
these steps:
1. If your AC adapter has a separate AC power cable,
push the cable connector firmly into the AC inlet.
2. Open the connector cover on the side of the camera.
3. Plug the adapter cable into the DC port on the camera.
4. Plug the AC adapter into an electrical outlet.
connector cover
5
R
Poppy+ Rev.C
A5 size Chapter 5
5/8/98 pass 1
Camera Options
5-5