Filter
Top Products
195
Software Installation
• If the camera communicates with the PC successfully,
will be displayed in the control panel and viewfinder.
Photographs can be transferred to the computer as
described in the manual for the supplied software (on
CD).
MEMO
See the manuals provided with the supplied software for
more information.
CAUTION
• FinePix S5 Pro is compatible with MTP/PTP (Picture
Transfer Protocol). A MTP/PTP-compatible camera is a
camera which can recognize the PC and printer
automatically when connected.
• Always use the FUJIFILM AC Power Adapter AC-
135VN (sold separately). If the camera suddenly loses
power during data exchange, the memory card could be
damaged.
• Do not disconnect the USB cable (mini-B) when the
camera is communicating with a PC. If disconnecting
the USB cable (mini-B) during communication, the files
on the memory card may be destroyed.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable (mini-B) is connected
correctly and pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.197).
• Auto power save is disabled during USB connection.
• Before replacing the memory card, always disconnect
the camera from the PC. See p.197 for information on
the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (mini-B), always check
that the access lamp is off.
• An image taken with CCD-RAW (➝p.93) setting is
required to be transferred to a PC using FinePixViewer.
Continued Q