Filter
Top Products
Chapter 3: Taking Pictures 17 Taking More Advanced Pictures
4 Press the shutter release button. Wait for the shutter sound, indicating the camera has captured
the image. Then release the button.
The captured image appears for a 3-second Instant Review period on the image LCD. If you are
happy with it, do nothing, and the image will be saved on the memory card. If not, you can
delete the image while it is still displayed in Instant Review by pressing the middle (Delete)
soft key.
Taking More Advanced Pictures
As explained in Chapter 2: “Preparing to Take Pictures,” your camera has more advanced features
that you can set via your camera’s status LCD and image LCD. Here is the general procedure for
taking more advanced pictures:
1 Set the camera mode dial to the Capture mode .
2 Power on the camera if you haven’t already.
3 Set the flash mode, timer mode, and/or the auto focus range via the status LCD buttons on the
top of the camera, as desired. (For information on these settings, see “Using the Status LCD” on
page 9.) The settings you choose are displayed in the status LCD.
4 Press the DISPLAY button on the back of the camera to turn the image LCD on.
5 Press the left soft key to set the image type (One Shot, Continuous, or Timelapse). (For more
information, see “Setting the Image Type” on page 13.) The image type you choose is displayed
on the left side of the bottom overlay bar in the image LCD.
6 Press the MENU button on the back of the camera to display the Capture mode menus on the
image LCD, if you wish to change any of the default camera settings in the menus.
7 Select the menu options you wish to change in the Capture Settings, Photo Assist, and/or Image
Stamp menus, and then make the changes to the camera settings within those menus, as
desired. (For information about changing settings in these Capture mode menus, see“Capture
Mode Menus and Soft Keys” on page 52.)
For example, if you have set the camera to the Timelapse image type, then you might want to
change the default settings in the Timelapse menu option of the Capture Settings menu. In this
case, you could change the number of images and/or the interval between them for the time-
lapse sequence that you want to shoot.