Filter
Top Products
Chapter 5: Sharing Images 40 Transferring Images to Your Computer
Figure 23: Connecting the USB Cable to the Camera 4 Open the door to the camera’s connector compartment and connect the square end of the USB
cable to the bottom (USB) connector (see Figure 23).
5 Set the camera to PC Connect mode .
6 Power on the camera. Within a few seconds, your computer detects the camera on the USB port.
What happens next depends on what version of Windows your computer is running:
Windows Me
Windows MeWindows Me
Windows Me Your computer runs the Microsoft Scanner and Camera
Wizard. Follow the prompts in the Wizard to copy the
images to your computer.
Windows 98
Windows 98Windows 98
Windows 98
or 2000
or 2000or 2000
or 2000
The main window of the HP Photo Imaging Software
opens. Do the following:
1. Click Unload Camera
Unload CameraUnload Camera
Unload Camera in the main window.
2. Click the Start
StartStart
Start button in the Unload Images window.
The images are copied to your computer.