Filter
Top Products
15
Getting Started
6. Set the Date and Time
The camera has a clock that records the date and time at
which you take each picture. This information is recorded in
the image properties, which you can see in Playback, when
viewing Image Advice, and when viewing the image on your
computer. You can also choose to have the date and time
imprinted on the image (see
Date & Time Imprint on
page 54).
1. The first item highlighted is the
date and time format. If you want
to change the format, use the
buttons. If the date and time
format is correct, press the
button to move to the next
selection.
2. Adjust the value of the highlighted selection using the
buttons.
3. Press the buttons to move to the other selections.
4. Repeat Steps 2 and 3 until the date and time are set
correctly.
5. Press the button when you have entered the proper
values for the date and time. A confirmation screen
appears, asking if the correct date and time have been
set. If the date and time are correct, press the button
to select Yes.
If the date and time are incorrect, press the button to
highlight No, and then press the button. The Date &
Time screen appears again. Repeat Steps 1 through 5 to
set the correct date and time.
TIP: If you need to change the date and time settings later,
you can do this with the Date & Time setting in the Setup
menu. See Chapter 6, Using the Setup Menu.