Filter
Top Products
16
Introduction
Caution
The VIDEO OUT SYNC
option is for use with the
VZ-HD4900A. With the
VZ-HD4000A, always set to
ON.
Make the settings for
Serial communication baud
rate
Video OUT Sync
switch[VZ-HD4900A] and
installation method prior to
turning the camera on. Do
not make these settings after
turning the power on.
If you switch the setting for the
installation method and then
turn the power on, it will erase
all the presets.
When connecting devices
in a daisy chain (P. 26), it is
necessary to make the
Serial
communication baud rate and
RS-232C/RS-422 selections
the same for all connected
cameras.
To change switch settings, use
a slender slotted screwdriver.