Filter
Top Products
26 27
Installation and Connection
Connecting with RS-422 Cables
Connecting with RS-232C Cables
External Control Device External Control Device
RS-232 cable
RS-422 Cables
Terminal
block
connector
RS-232 cable
RS-232 cable
Camera 1
Camera 1
Camera 2
Camera 2
Camera 3
Camera 3
Caution
When connecting devices in a daisy chain, it is necessary to make the
selections the same for all the connected cameras, namely the SYSTEM
SELECT SWITCH 1 (serial communication baud rate) and SYSTEM
SELECT SWITCH 3 (RS-232C/RS-422).
Make the switch settings before turning the device on. Turn the power on
after making switch settings (P. 28).
To change SYSTEM SELECT SWITCH settings, use a slender slotted
screwdriver.
Do not set the switches to anything other than as instructed.
Doing so may cause a malfunction.