Hitachi VZ-HD4000A Camcorder User Manual


 
34 35
Direct Remote Control Function
Making Camera
Presets
You can set up presets for different
camera settings, such as its pan, tilt
and zoom. Once presets are made,
they are retained even if the power
is turned off.
lPresets that can be accessed
from the remote control can
be made from 1 to 32.
To use presets from 33 up,
use the external control
function.
lOnce you save preset 1,
whenever you turn the power
on thereafter, the camera
starts under preset 1 settings.
lTo see what preset items can
be made, refer to “Preset
Items and Retained Settings”
(P. 53).
PRESET
RESET
Preset number
buttons
ENTER
1
When the camera is in
the state you wish to
save, press [PRESET]
and then press the
number you wish to
save (from [1] to [32])
2
Press [ENTER]
To Call up a Camera Preset
Press the number of the preset ([1]
to [32]) you wish to call up and then
press [ENTER].
To Delete a Preset (Reset)
Press [RESET] and then the
number of the preset ([1] to [32])
you wish to delete, and then press
[ENTER].
Entering Numbers
For presets 1 to 9:
Simply press [1] to [9] on the remote
control.
Ex.: For 3, simply press [3].
For presets 10 to 32:
Press the rst digit and then the
second.
Ex.: For 25, press [2] and then
press [5].
Caution
If the range of movement for pan/
tilt is limited by the swivel setting
(P. 45), if you move to a pan/tilt
position set up ahead of time, it
will be within the limited movement
range.