Hitachi VZ-HD4000A Camcorder User Manual


 
18 19
Installation and Connection
Installing it on a Desk
or Table
Install it in a stable location where it
is unlikely to fall off.
Mounting on a Tripod
(Sold Separately)
Attach the tripod to the tripod
mounting hole on the base of the
camera.
Tighten the screw securely by hand.
Tripod mounting hole
Standard size of usable
tripod mounting screw
-20UNC
=4.5 mm ± 0.2 mm
Caution
Set up the tripod according to its
user’s manual so it is steady and
will not fall over.
Warning
Do not mount the camera using
the tripod screw when installing it
in a high place.
Install with Mounting
Screws
(Sold Separately)
Install mounting screws in the four
screw mounting holes on the base.
Tighten the 4 screws securely.
Screw mounting holes
Standard size of mounting
screws
M3 screw
= 3 mm to 4 mm
Rubber foot on base of camera