Filter
Top Products
January 31, 2007
Dual-Tap TM-4200GE AccuPiXEL Series Camera-Control Software
Dual-Tap TM-4200GE AccuPiXEL
Series
Camera-Control Software
Operation Manual
TM-4200GE series.
6 Introduction
The Dual-Tap AccuPiXEL software offered for the TM-4200GE is
camera control software. It is not used in image capture, but rather to
configure camera functionality. The Cam2Net software and Dual-
Tap AccuPiXEL software have the same capabilities. The Dual-Tap
AccuPiXEL software is not needed to use the camera.
If you find it more comfortable to use, or the AccuPiXEL software seems more compatible with your
system, then it may be used instead of Cam2Net to configure camera functionality. The Cam2Net and
AccuPiXEL software can not run simultaneously.
The Dual-Tap AccuPiXEL series cameras are high-resolution, progressive scan cameras with JAI Inc.-
proprietary LUT control and other excellent features. The software for these cameras was developed to
function as standard software for the entire Dual-Tap AccuPiXEL series, and can open either the RS-
232 serial port (COM) or Camera Link. Camera Link users must physically install the Camera Link
frame grabber board into the PC. They must also install the Camera Link API (clserXXX.dll) software.
These cameras are specially designed to capture images in progressive scan (non-interlace) format,
producing a full frame of electronic shutter images, as well as normal images.
Although this software works with all AccuPiXEL cameras, the interface for the TM-4200GE series
appears different from other cameras compatible with this same software, and has various capabilities,
depending on the camera model the software is accessing. The TM-4200GE series software is therefore,
specifically documented in this section