Filter
Top Products
Page 42
Dual-Tap TM-4200GE AccuPiXEL Series Camera-Control Software
Introduction
The Gamma.45 option is designed to cause the camera to gather light for a result very similar to what
the human eye sees. The heavier curved blue line represents the Gamma.45 LUT adjustment.
FIGURE 46. Gamma.45 imitates human eye sensitivity when creating an image.
The knee setting allows two adjustments in the light gathering configuration of the LUT to permit the
camera to correct images as they are captured. It is possible to set knees on any of the drop down
settings by clicking on the existing curve and moving it to the desired configuration. If a drop-down
menu setting is selected without adjusting the knees, the camera sets the default.
FIGURE 47. The setting does not activate until the Send Knees button is clicked.
6.5.5 (c) Knee Control
The Knee Control graphical control allows you to change two knee point values visually by clicking and
dragging the “knee line.” You may also enter X
1
, Y
1
, X
2
, Y
2
values directly to adjust the knee curve.
When you have chosen the value you want and are ready to set this value to the camera, click the “Send
Knees” button.