Open as PDF
Scenes of Intelligent Auto
Display Icon Description
Captures one’s skin beautifully.
Allows people to be captured naturally.
Focuses at a far distance and captures a sharp image
with vivid colors.
Records with minimal noise in the overall image.
Allows night scenes to be captured accurately with
minimal noise in the overall image.
Prevents colors from fading even when recording in
a bright environment.
Records while focusing on a near object.
Reproduces the green color of trees vividly.
Reproduces the colors of sunset naturally.
Adjusts settings so that the subject does not appear
too dark due to backlight.
Allows people to be captured naturally with minimal
noise in the overall image.
Records while focusing on a near object even in a dark
Scenes can be detected according to the shooting conditions and
automatically adjusted in Intelligent Auto mode.
Some functions may not work properly depending on the shooting conditions.
Useful Settings for Recording
When “QUICK RESTART” is set to “ON”, this unit turns on immediately if you
open the LCD monitor within 5 minutes after the power is turned off by closing
“QUICK RESTART” (A p. 68)
When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically
to conserve power when it is not operated for 5 minutes. (only when using the
“AUTO POWER OFF” (A p. 67)
When “FACE PRIORITY AE/AF” is set to “ON” (default setting), this unit
detects faces and automatically adjusts its brightness and focus to record the
faces more clearly.
“Capturing Human Subjects Clearly (Face Detection AE/AF)” (A p. 29)
Do not expose the lens to direct sunlight.
Do not use this unit in the rain, snow, or places with high humidity like the
Do not use this unit in places subject to excessive humidity or dust, as well as
places exposed to steam or smoke directly.
Do not remove the battery pack, AC adapter, or SD card when the access
lamp is lighted. The recorded data may become unreadable.
This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it from
functioning properly. In such a case, turn off the power, then remove the AC
adapter and battery pack. This unit will be reset.
Make a backup of important recorded data.
It is recommended to copy your important recorded data to a DVD or other
recording media for storage.
JVC will not be responsible for any lost data.
Check the remaining recording time in the media before you start shooting. If
there is not enough space, move (copy) the data to a computer or disc.
Do not forget to make copies after recording!
Recording stops automatically as it cannot be performed for 12 or more
consecutive hours according to specifications.
(It may take some time to resume recording.)
For long recordings, the file is split into two or more files if the size exceeds 4
You can connect this unit to the AC adapter to record for long hours indoors.
When there are many files in the media, it may take time for them to be
displayed on the playback screen. Wait for a while as the access lamp appears
blinking, which indicates normal operation.
Depending on the shooting conditions, the four corners of the screen may
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
The angle of view can be adjusted using zoom.
Use the W end (wide angle end) to shoot a wider field of view.
Use the T end (telephoto end) to magnify the subject for shooting.
When digital zoom is used, the image becomes grainy as it is digitally
The zoom ratio range can be changed.
“ZOOM” (A p. 58)